Manchester Roofing Systems specializes in high-performance leak-proof ENERGY STAR® sustainable cool roofing systems for flat & low slope roofs.
RCI (http://www.rci-online.org/) is an international association of professional consultants, architects, and engineers who specialize in the specification and design of roofing, waterproofing, and exterior wall systems. Oak Ridge National Laboratory (http://www.ornl.gov/) conducts basic and applied research & development to create scientific knowledge and technological solutions that strengthen the nation's leadership in key areas of science; increase the availability of clean, abundant energy; restore and protect the environment; and contribute to national security.
Per RCI & ORNL, cool roofs:
- Reduce annual energy consumption by 15-45%
- Extend the useful life of the roof
- Improve the performance of any underlying insulation
- Reduce the capacity requirements for HVAC systems
- Dramatically improve indoor comfort in non-air conditioned areas
Download “High-Performance Roofing: The Next Stage in Low-Slope Commercial Roofing”
Manchester Roofing Systems uses some of the very best names in high-performance roofing available today:
Conklin combines BASF spray polyurethane foam (SPF): 4-7 YR ave. payback in energy savings
- 20-30 YR low-maintenance leak-proof performance
- Self-flashing & seamless
- Adheres directly to existing roof in almost all situations
- Primer not required in most cases
- Conforms quickly to irregular shapes
- Reduces tear-off & disposal costs
- FM4470 approval for extreme performance & third-party formulation/production audits
- Highest wind uplift & severe hail resistance
- Mechanical damage & new penetrations easily repairable
- Sustainable through re-coating
with Rohm & Haas 100% EC acrylic & polyurethane-modified acrylic roofing technologies:
- Benchmark™ is up to 6x tougher than other leading acrylics
- PUMA™ is 3x tougher than even the best acrylic roofing
- Equinox™ allows application at 36°F and rising
- Cool roof 85% initial solar reflectance (72% retained)
- Seamless membrane
- 10-15 YR renewable labor & material warranties available
- Over 2 billion SF applied world-wide
Duro-Last is a custom pre-fabricated reinforced PVC single-ply system:
- 15 YR No Dollar Limit transferable labor & material warranty std. with no exclusion for ponding water or consequential damages
- 80-85% of seams are welded at the factory
- Self-extinguishing membrane w/time-tested formulation
- Single-source provider of all system components
- Year-round installation
- Manufacturer’s rep inspection before, during & after installation
- Reduces tear-off & disposal costs
- FM4470 approval for extreme performance & third-party formulation/production audits
- Two-way roof vents allow building to “breath”
- Mechanical damage & new penetrations easily repairable
- Cool roof 88% initial solar reflectance (68% retained)
- Up to 20 YR transferable warranties available
- Resists fungus (ASTM G-21)
- Over 1.5 billion SF applied on all types of buildings
Hydro-Stop is a fully reinforced elastomeric system:
- Fully adhered
- Does not require a stop at roof edges w/o parapet walls
- 10 historic colors
- Cool roof 79% initial solar reflectance (70% retained)
- 10 YR renewable labor & material warranties available
- Manufacturer’s rep inspection before, during & after installation
- Reduces tear-off & disposal costs
- FM4470 approval for extreme performance & third-party formulation/production audits
- Mechanical damage & new penetrations easily repairable
- Resists fungus & algae (ASTM G-21 & G-29)
Each system is Factory Mutual approved as a Class 1 roofing both as a stand-alone roof and as a re-cover system over a variety of substrates.
|
|
Do you have a Leak-Proof ENERGY STAR® Roof?
